Wireless Remote Switch 30A Relay with 328ft Long Range DC 12V/24v/48v/72V Switch for Anti-Theft Alarms, Security Systems Roller Lind Door, Motor Cycles etc (Black)

Product Description

Product Description

Package Includes 2 x remote controls 1 x Receiver

30A Remote Control Switch

1. Working frequency : 433.92MHz

2. Relay rated voltage : DC12-72V, 50/60Hz

3. Relay rated current : 30A

4.Receiver sensitivity : -108 dBM

5.Operation mode : Momentary Mode,Toggle Mode,Latching Mode,Output Power-on Mode

6.Match Way : Learning button

7.Support remote type : Learning code (1527)

8.Size : 80*45*32(mm)

Momentary Mode

[Introduction]Press and hold a button of the remote control to power on the output of the device, and release it to power off the output of the device.

[Setting Method]Press the learning button once, the device indicator light is always on, the device enters the code matching state,and then press the button of the remote control,the indicator light goes out after the code is successfully coded.

Toggle Mode

[Introduction]The same button of the remote control can control the power-on and power-off of the output terminal of the device.Press once to power on the output terminal of the device, and press it again to power off the output terminal of the device.

[Setting method] Press the learning button twice continuously, the device indicator light is always on, the device enters the code matching state,and then press the button of the remote control, the indicator light goes out after the code is successfully coded.

Latching Mode

[Introduction]The two buttons of the remote control respectively control the power-on and power-off of the output terminal of the device.One button can only control the power-on of the output terminal of the device,and the other button can only control the power-off of the output terminal of the device.

[Setting Method] Press the learning button 3 times, the device indicator light is always on, the device enters the code matching state,and then press the remote control button, the device indicator light flashes and then stays on, then press another button on the remote control,right After the code is successful, the indicator light goes out.

Output Power-on Mode

[Introduction]When you power off and then power on,the output terminal of the device is directly powered on.

[Setting Method]Press the learning button 5 times in succession，the device indicator flashes,and the device output is powered on and successfully set to the output power-on mode(This setting does not need to press the remote control).

【DC wide voltage 12V~72V]】DC 12V 24V 36V 48V 72V wide voltage use, how many volts are input and how many volts are output
【30A high-power relay】 Can be loaded with high-power electrical appliances to ensure long-term stable control.
【Strong Signal, RF Technology】The product is equipped with a signal antenna, and the remote control distance can reach up to 200 meters (open and barrier-free environment). ❤Note:①When the remote distance can’t meet the requirements, pls replace the battery; ②The remote distance will be affected by the environment. Don’t place the receiver or remote in a metal case or near a metal object; ③You can try to straighten the receiver or remote antenna to increase the remote distance.
【Multiple Working Modes, High Safety】 The working mode of the receiver is adjustable and can be used with the remote control to switch between 3 working modes: ①Momentary; ②Toggle; ③Latched.
【Wide application】Mainly used in industrial control and security fields, such as lighting, DC motors, wireless security alarms, wireless access alarms, wireless controllers, etc.