Rockville Ground Pounder, 800W Powered Dual 10″ Car Subwoofer, Includes Remote, Compact Aluminum Enclosure, Perfect for Ground-Shaking Bass

Product Description

Rockville Ground Pounder 800w Powered Dual 10″ Car Subwoofer/Aluminum Enclosure

Includes of GROUND POUNDER:

SubwooferRemoteInstallation mounting bracketHardware connection screwsManual

Features of GROUND POUNDER:

Rockville Ground Pounder 800w Powered Dual 10″ Car Subwoofer in Aluminum EnclosureSize: Dual 10.5” woofersPeak Power: 800 WattsRMS Power: 200 WattsDie-Casting Aluminum Housing10.5” Subwoofer10.5”Passive Radiator SubwooferSingle 2 Ohm2” CCAW Voice CoilFoam SurroundFull edge surround gives more surface area to support more excursion and higher SPLSubwoofer is integrated into the enclosure rather than being 2 separate units. This is engineered to give you ground pounding bassIncludes an easy to install bolt-down mounting kitPolypropylene ConePolypropylene Dust CapMatte Black Custom Molded Metal Grille55 oz Ferrite MagnetClass AB Amplifier Produces Amazing Sound QualityHigh Speed MOSFET Power SupplyLow Level &High Level InputsAuto turn on (on/off selectable)Input mode: Select either Low level RCA inputs or High speaker level inputsEasily detaches from the mounting kit if you need extra cargo spacePhase switch: 0 to 180 degreesGain control: 100mV to 4V with line input and 250mV to 10V with speaker level inputBass equalizer: from 0 to +12 dB (centered at 50 Hz)Adjustable crossover frequency: (variable from 50 Hz to 150 Hz @ 12 dB/octave)Frequency Response: 30Hz – 150HzSensitivity: 93dB @1W 1M

THD :< 1%Signal To Noise Ratio: >90dBInput sensitivity: Low Level : 0.1 V , High Level:0.25VPower (Blue) &Protect (Red) LED Indicators25A FuseDimensions (H x W x D): 10.7” x 13.4” x 8.74” (271 x 340 x 222 mm)

Includes: Subwoofer, Remote, Installation mounting bracket, Hardware connection screws, Manual
Features: Rockville Ground Pounder 800w Powered Dual 10″ Car Subwoofer in Aluminum Enclosure, Size: Dual 10.5” woofers, Peak Power: 800 Watts, RMS Power: 200 Watts, Die-Casting Aluminum Housing, 10.5” Subwoofer, 10.5”Passive Radiator Subwoofer, Single 2 Ohm
2” CCAW Voice Coil, Foam Surround, Full edge surround gives more surface area to support more excursion and higher SPL, Subwoofer is integrated into the enclosure rather than being 2 separate units. This is engineered to give you ground pounding bass, Includes an easy to install bolt-down mounting kit, Polypropylene Cone, Polypropylene Dust Cap, Matte Black Custom Molded Metal Grille, 55 oz Ferrite Magnet
Class AB Amplifier Produces Amazing Sound Quality, High Speed MOSFET Power Supply, Low Level &High Level Inputs, Auto turn on (on/off selectable), Input mode: Select either Low level RCA inputs or High speaker level inputs, Easily detaches from the mounting kit if you need extra cargo space, Phase switch: 0 to 180 degrees, Gain control: 100mV to 4V with line input and 250mV to 10V with speaker level input, Bass equalizer: from 0 to +12 dB (centered at 50 Hz)
Adjustable crossover frequency: (variable from 50 Hz to 150 Hz @ 12 dB/octave), Frequency Response: 30Hz – 150Hz, Sensitivity: 93dB @1W 1M, THD :90dB, Input sensitivity: Low Level : 0.1 V , High Level:0.25V, Power (Blue) &Protect (Red) LED Indicators, 25A Fuse, Dimensions (H x W x D): 10.7” x 13.4” x 8.74” (271 x 340 x 222 mm)