AHD 720P Backup Camera,170 Degree Wide Angle Rearview Reversing Camera,IP68 Waterproof Front/Side View Camera Clear Night Vision Reverse Rear View Camera for Car Vehicle SUV RV

Product Description

Supports 3 signal modes Switchable to AHD 720P/NTSC/PAL

1. The single yellow plug is connected to the reversing image display screen

2. The red connection line at the end of the single yellow plug is powered from the car computer and needs to be powered from the reversing module behind the central control (non-professionals are not recommended to power from here)

3. The red connector at one end of the double connector is connected to the power interface of the camera

4. The yellow connector at one end of the double connector is connected to the video interface of the camera

5. The red and black wires without connectors are the connecting wires (powered by the brake light circuit)

Installation operation guide

1.Before installation, conduct a simple test on the camera at the display screen to confirm that there is a video signal output and whether the receiving screen format is CVBS or AHD; the default output format of the camera is CVBS, and to switch the output format to AHD, just unplug the terminal in the figure below.

When installing and fixing the camera, choose the center position of the rear of the car. If it is not centered, the final reversing image will be offset.

2.Open the rear guard plate of the car’s tailgate, find the circuit of the car’s brake light (either left or right), peel off the insulation layer and scrape it to the reverse gear, use a multimeter to test and confirm the positive and negative poles, and confirm that the rear gear is shifted back to “P” gear.

3.Use the connecting wire on the signal extension cable to connect in the red “+” “black” -” wiring method; after connection, use insulating tape to wrap around the connection.

4.Connect the power interface on the extension cable with the power interface on the camera.

5.Arrange the extension cable to the central control position and connect the signal connector with the connector of the receiving screen.

6.Put the reverse gear to confirm that the camera is working properly. If the up and down angle of the camera is incorrect, loosen the screws on the small bracket of the camera to adjust the up and down angle until the camera range is suitable for you and then tighten the screws.

7.Install the rear guard plate of the tailgate, and all installation work is completed.

【High-Definition 720P Clarity】Experience sharp, vivid images with our AHD 720P camera, ensuring you get a clear view of everything behind your vehicle.
【170° Wide-Angle View】The 170° wide-angle lens covers a broad area, minimizing blind spots and providing a full perspective of the rear, helping you avoid obstacles while reversing. The integrated night vision technology ensures visibility in low-light conditions, making parking and reversing safer even after dark.
【Waterproof & Weatherproof (IP67)】Built to withstand all weather conditions, the IP67 waterproof rating ensures that the camera remains fully functional, whether it’s raining, snowing, or muddy.
【Versatile Mounting Options】The camera has flexible mounting options, allowing you to install it on the back, front, and side of the vehicle in different positions, such as under the side mirror, front bumper, grille, rear fender, fender, tailgate handle or body, to satisfy the needs and preferences of different users.
【Easy Installation】The AHD 720P Backup Camera is designed for straightforward installation with most vehicles, providing a hassle-free setup with all necessary hardware included.