5.8GHz Doppler Effect Microwave Motion Sensor Compatible with Arduino and Raspberry Pi Motherboard. for Industry, Transportation, Agriculture, Smart Home, Security Monitoring, etc.
$11.99
CQRobot launches 5.8GHz Doppler effect microwave motion sensor (CQRSENWB02), built-in sensor – AT5820 microwave radar chip. The AT5820 chip integrates a high-performance microwave radar transceiver and MCU, which can be interconnected with other main controllers or sensors, and filter out clutter interference through algorithms. It is not only widely used in human body detection, but also widely used in the detection of many other objects. With the characteristics of long distance and high sensitivity, it is not limited by the ambient temperature. It is used in industry, transportation, agriculture, smart home, security monitoring and other fields.
Note: For technical support, please refer to the CQRobot Wiki to provides sample programs and user manuals, SKU: CQRSENWB02.
SPECIFICATION
5.8GHz Doppler Effect Microwave Motion Sensor
– Working Voltage: DC5V
– Operating Frequency: 5.8GHz
– Radar Main Chip: AT5820
– Transmit Power: -5dBm to 0dBm
– Power Consumption: 33mA
– Baud Rate: 115200bps
– Beam Angle: 120 Degrees
– Operating Temperature: -40 Degree Celsius to +85 Degree Celsius
– Output Signal: High and Low Level or PWM
– Communication Interface: UART Serial Port
– Detection Distance: Indoor Hanging Height 3 Meters, Sensing Radius 5 Meters
– Dimension: 34.5mm * 26.7mm
– Mounting hole size: 3.0mm
Wire Specifications
– Cable Specifications: 22AWG
– Material: Silicone
– Withstand Voltage: Less Than 50V
– Withstand Current: Less Than 1000MA
– Length: 21cm
– Line Sequence: Red-VCC, Black-GND, Green-OUT, Blue-TX, Yellow-RX.
DISTRIBUTION LIST
1 * 5.8GHz Doppler Effect Microwave Motion Sensor
1 * JST 5-Pin Cable
Product Dimensions : 2.83 x 2.01 x 0.63 inches; 0.71 ounces
Item model number : CQRSENWB02
Date First Available : November 28, 2022
Manufacturer : CQRobot
ASIN : B0BNHV9HD4
Country of Origin : China
The microwave motion sensor is a microwave moving object detector designed by the principle of Doppler radar. Unlike ordinary infrared detectors, microwave sensors detect the movement of objects by detecting the microwaves reflected by the object. The detection object will not be limited to the human body, but there are many other things.
Non-contact detection; Adapts to harsh environments without affecting by temperature, humidity, noise, airflow, dust, light, etc. Powerful anti-RF interference capability; Low output power, no harm to human body; Long detection distance.
Can detects of non-living objects; The microwave moves at the speed of light with great directionality. Compatible with Raspberry Pi and Arduino Board.
It is used in industry, transportation, industry, agriculture, smart home, security monitoring and other fields.
Note: There are ultra-high frequency MOS devices inside the microwave motion sensor. If you try to use battery power to test during the test, this can avoid the breakdown caused by the static pressure difference between the power supply and the test device, such as the oscilloscope; in addition, when the product is in use, Please try to choose battery power supply to ensure the best detection effect.
There are no reviews yet.