iCarsoft Obd2 Scanner, Code Reader Car Diagnostic Tool BMM V2.0 for BMW/Mini, with Oil Service Reset, EPB, BMS, DPF, SAS, ETC, OBD II, Updated Version of i910-II

Product Description

Get Faster results with the iCarsoft Obd2 Scanner BMM V2.0 tool

If you have your own shop or you are your own mechanic time is money. Our remarkable code reader will allow you to obtain accurate diagnostics in less time, we deliver OEM level results on your cars electrical systems such as the engine, transmission, ABS and airbag etc. Supports OBDII/EOBD, Ten Modes of Operation, reads live data, full ECU diagnosis, oil light/service, Electronic Parking Brake, Battery Management System, Diesel Particulate Filter, Electronic Throttle Control systems, and Steering Angle Sensor. Saving you time and money!

The iCarsoft obd2 code scanner can read and erase codes and will also retrieve a great deal of information from the Engine Control Unit (ECU). The ECU is what generates the Check Engine Light when there is a problem with your car.

This obd2 code reader shows real-time live data reported by the ECU, engine temperature, O2 sensor readings etc. Even a beginner can use this diagnostic scanner to find out what the problem is, saves time and money figuring out the problem, without all the guess work.

Where is the OBDII interface located?

The OBD2 port is often under the dashboard, or under a panel below the handbrake in the center console.

How do you get started?

You simply plug it into the OBD II port on your car and turn the ignition on and you are ready to go.

When you can’t erase a fault code

The fault that is causing the code to show up will need to be repaired before the code can be erased.

Our Key Features

Reads and clears your check engine light codes, both generic and manufacturer specific codes, resets monitor

Built-in DTC lookup library for manual retrieval with code definition

Displays all data stream items or select a certain item of live data with a graph

Freeze frame data, shows vehicle parameters recorded by ECU

O2 sensor test which allows retrieval and viewing of the O2 sensor test results for the most performed tests from the vehicle’s on-board computer

On-board monitor test can be utilized to read the results of an on-board diagnostic monitoring

EVAP system test lets you initiate a leak test of the vehicle’s EVAP system (not all vehicles support the EVAP test, it depends on what’s installed on your OBDII system from the manufacturer)

Vehicle info will display VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration Verification Number)

OBDII Engine Code Reader Functions:

1. Read Codes

2. Erase Codes

Full ECU DiagnosisEasy to use with silicone keys

5. I/M Readiness — I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.

6. Data stream.

7. Freeze Frame — When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.

8. O2 Sensor Test — This option allows retrieval and viewing of O2 sensor test results for the most recently performed tests from the vehicle’s on-board computer.

9. On-Board Monitoring — This function can be utilized to read the results of an on-board diagnostic monitoring tests for specific components/systems.

10. Evap System Test — The EVAP test function lets you initiate a leak test for the vehicle’s EVAP system. Before using the system test function, refer to your vehicle’s service repair manual to determine the procedures necessary to stop the test.

11. Oil Light/Service Reset: Support service lamp reset.

12. Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for replacement and initialization.

Battery Management System (BMS), registers new battery to the BMS while battery replacement.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.Electronic Throttle Control systems (ETC) relearn the throttle valve control value while clear or replace the throttle valve.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.The Print Data function allows you printing out diagnostic data recorded by the scan tool or customized test reports.Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.

19. Vehicle Information — The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of vehicle.

20. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and along with pending codes

21. Turn off Check Engine Light (MIL), clear codes and reset monitors

22. Read live PCM DataStream

23. Support CAN (Controller Area Network) and all others

24. Multilingual menu and DTC definitions- English, Spanish, and German, etc.

25. Read pending DTCs, Read permanent DTCs

26. DTC Library to lookup when user is operating

27. Supports most of the OBDII/EOBD test modes including: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.

28. Works on most of 2001 and later OBDII compliant PETROL European vehicles

29. Works on most of 2004 and later OBDII compliant DIESEL European vehicles

30. Works on most of 1996 and later OBDII compliant US and Asian vehicles

31. View & Graph Live Data in Color Graphing with a blazing fast refresh rate for better graphing and live data readings.

Upgrade via a PC.

DO IT YOURSELF

Simple and super easy to use. This little device saves you the trips to your mechanic, lets you decide if it’s something you can fix or need more advanced help. Save money and time

HASSLE-FREE

The OBD2 scanner comes with a cable that can get power directly from your vehicle via the OBD2 Data Link Connector. No need for batteries or a charger, just plug in and your all set to check your cars health

AFFORDABLE COST WITH PROFESSIONAL RESULTS

One of the most affordable BMW scan tools under 200, while still providing advanced features that are usually only available in a dealer level scanner. Saving money by doing it yourself, pays for the scanner.

COMPATIBLE WITH BMW MODELS -This full function diagnostic tool, is compatible with OBD2 (1996-2017) vehicle models and will work on most on-board electronic systems. Supports the OEM of brands made in America, Asia and with PETROL and DIESEL in Europe OBD/OBD2/EOBD. This car computer reader can also be used as a universal OBD scanner to retrieve generic check engine light codes allowing you to read or clear the codes. Simply plug into the OBD II port on your car, turn the ignition on and go
BEST IN CLASS INNOVATION- iCarsoft BMM V2.0 can do it all-reads and clears trouble codes on most systems such as engine, transmission, ABS and airbag etc. Supports OBDII/EOBD, with Ten Modes of Operation, read live data, full ECU diagnosis etc.It automatically detects your car model and scans all modules for error codes. This special technology allows for specific diagnostic functions and testing!
DYNAMIC TEST CAPABILITIES- The Multi-lingual function allows you to view & graph live data in color while graphing at a blazing fast refresh rates for quicker results. Our OBD2 scanner allows you to read pending DTCs and permanent DTCs with a DTC Library to lookup while operating the tool. Providing you with accurate data results for all your error codes
DIAGNOSTIC FUNCTIONS & ADVANCED FEATURES- Along with the standard OBD functions, this automotive diagnostic scanner also includes special functions including control service interval reset, brake deactivation, battery registration, oil light service reset, throttle body adjustment, DPF Regeneration, Freeze Frame, O2 Sensor Test, and Evap System Test are just a few of the special functions this professional quality car scanner provides